How to Sharpen Annihilator Broadhead: Ultimate Techniques for Precision

To sharpen the Annihilator Broadhead, follow these steps carefully. Start by placing the broadhead into a broadhead sharpener and firmly secure it.

Then, gently run the sharpener along the cutting edges of the broadhead to sharpen them.

Why Sharpening Annihilator Broadhead Blades Is Important

Sharpening Annihilator broadhead blades is crucial for optimal performance. Learn how to sharpen these blades effectively to ensure accurate and deadly shots.


When it comes to archery, accuracy and precision are key. That’s why sharpening your Annihilator broadhead blades should be at the top of your priority list. Not only does it increase the accuracy of your arrows, but it also maintains the effectiveness of the blades and extends the lifespan of your broadheads.

Let’s dive deeper into the reasons why sharpening your Annihilator broadhead blades is crucial:

Increase Arrow Accuracy And Precision:

  • Sharpening your Annihilator broadhead blades ensures that they cut through the air with minimal resistance, optimizing your arrow’s trajectory.
  • Sharp blades have the ability to penetrate the target with greater ease, providing better accuracy and precision.
  • Smooth, sharp edges reduce the chances of deflection, improving your shooting accuracy.

Maintain Blade Effectiveness:

  • Over time, broadhead blades can become dull due to repeated use. By sharpening them regularly, you ensure that they remain effective in delivering a clean and humane harvest.
  • Dull blades might cause the broadhead to bounce off the target rather than penetrating deeply, resulting in an incomplete and potentially dangerous shot.
  • Keeping your blades sharp enhances their cutting power, maximizing their ability to inflict damage upon impact.

Extend The Lifespan Of Your Broadheads:

  • When you sharpen your Annihilator broadhead blades, you remove any damage or nicks, allowing them to endure more shots without losing their effectiveness.
  • Regular maintenance and sharpening prevent premature wear and tear, helping your broadheads last longer.
  • By keeping your broadheads sharp, you also reduce the risk of breakage upon impact, increasing their durability and saving you money in the long run.

Sharpening your Annihilator broadhead blades is not just a matter of convenience; it’s a crucial step to enhance your arrow accuracy, maintain blade effectiveness, and extend the lifespan of your broadheads. With sharp blades, you can shoot with confidence, knowing that your arrows will land where you aim and deliver a clean and ethical harvest.

So grab your sharpening tools and give your Annihilator broadhead blades the care they deserve. Happy hunting!

Choosing The Right Tools For Sharpening

When sharpening your Annihilator Broadhead, it is essential to choose the right tools for the job. Ensure your blades remain sharp and efficient with the appropriate equipment for a precise and effective cutting experience.


Selecting the appropriate sharpening stone:

  • Diamond stone: Ideal for sharpening annihilator broadheads, as they are extremely durable and provide excellent results.
  • Arkansas stone: Known for its natural oil content, which helps to achieve a smooth and polished edge on the broadhead.
  • Ceramic stone: Suitable for fine sharpening and polishing, ensuring a razor-sharp edge.

Understanding different types of sharpening devices:

  • Sharpening jig: A tool used to hold the broadhead securely in place during the sharpening process, allowing for precise sharpening angles.
  • Handheld sharpeners: Portable and easy to use, these devices are designed to sharpen broadheads quickly and efficiently.
  • Benchtop sharpeners: Electric sharpening tools that offer convenience and speed, making them an excellent choice for high-volume sharpening.

Essential tools for the sharpening process:

  • Honing oil: A lubricant used to reduce friction and prevent damage to the sharpening stone, ensuring smooth sharpening of the broadhead.
  • Honing guide: Helps maintain consistent sharpening angles by holding the broadhead at the desired position.
  • Cleaning brush: Required to remove metal shavings and debris from the sharpening stone, preventing any interference during the sharpening process.

Remember, selecting the right sharpening tools is crucial for achieving optimal sharpness and performance from your annihilator broadheads. By using the appropriate sharpening stone, understanding different sharpening devices, and having the essential tools at hand, you can ensure that your broadheads are consistently sharp and ready to deliver a lethal blow.

Step-By-Step Guide To Sharpening Annihilator Broadhead Blades

Discover the simple steps to sharpening Annihilator Broadhead blades effectively. This step-by-step guide provides clear instructions for keeping your broadheads sharp and ready for precision hunting.


Whether you’re a seasoned hunter or new to archery, maintaining sharp broadhead blades is crucial for a successful hunt. In this guide, we’ll take you through the step-by-step process of sharpening your Annihilator broadhead blades. From disassembling the broadhead to honing the blades, we’ll cover everything you need to know to ensure optimal performance.

So let’s dive in and get those blades razor-sharp!

Disassembling The Broadhead

Before you start sharpening, it’s essential to disassemble the Annihilator broadhead. Here’s how to do it:

  • Unscrew the ferrule from the broadhead tip using a suitable tool.
  • Keep the screws and washers in a safe place to avoid losing them.
  • Separate the blades from the ferrule by sliding them out carefully.

Inspecting The Blades For Any Damage

Once the broadhead is disassembled, take a close look at the blades to ensure they are in good condition. Here are the key points to consider:

  • Check for any chips, nicks, or bending on the blade edges.
  • Inspect the overall condition of the blades for signs of wear or damage.
  • If you notice any significant issues, it may be necessary to replace the blades.

Choosing The Correct Angle For Sharpening

To achieve optimal sharpness, it’s crucial to choose the correct angle for sharpening the Annihilator broadhead blades. Follow these guidelines:

  • Determine the manufacturer’s recommended angle for your broadhead.
  • Use a sharpening guide or angle gauge for precise angle measurement.
  • For Annihilator broadheads, the recommended angle is typically around 20 to 25 degrees.

Using The Sharpening Stone To Restore The Blade’s Edge

Now that you have the correct angle, it’s time to restore the blade’s edge using a sharpening stone. Here’s a step-by-step process to follow:

  • Wet the sharpening stone in water or honing oil, as per the manufacturer’s instructions.
  • Hold the broadhead in a stable position and place the blade against the stone at the chosen angle.
  • Apply gentle pressure and move the blade in a sweeping motion across the stone.
  • Repeat the process on both sides of each blade until you achieve a sharp edge.

Honing The Blades For A Refined Finish

Sharpening is not complete without honing the blades to achieve a refined finish. Here’s how to do it:

  • Use a fine-grit honing stone, such as a ceramic or diamond stone, for honing.
  • Wet the honing stone as instructed by the manufacturer.
  • Hold the broadhead firmly and lightly run the blades across the honing stone a few times.
  • This process helps refine the edge and remove any burrs, resulting in a razor-sharp finish.

By following this step-by-step guide, you can effectively sharpen your Annihilator broadhead blades for optimal hunting performance. Remember to always prioritize safety and carefully handle sharp objects throughout the process. With sharp broadhead blades, you’ll have the confidence to take accurate shots and increase your chances of a successful hunt.

Happy sharpening!

Tips And Tricks For Achieving Precision Sharpening

For precise sharpening of the Annihilator Broadhead, follow these expert tips and tricks. Achieve optimal sharpness by utilizing careful techniques and attention to detail.


Maintaining consistent pressure during sharpening:

  • Apply equal pressure throughout the sharpening process to ensure uniform results.
  • Avoid exerting too much force, which can lead to blade damage or uneven sharpening.
  • By maintaining a steady and consistent pressure, you’ll achieve a sharper edge.

Ensuring a balanced sharpening angle:

  • Find the proper angle for your Annihilator Broadhead by referencing the manufacturer’s guidelines or recommendations.
  • Align the blade with the sharpening stone or device, making sure it matches the angle specified.
  • Consistently maintain this angle throughout the sharpening process for optimal results.

Using lubrication for smoother sharpening:

  • Apply a small amount of lubricant, such as mineral oil or water, to the sharpening stone or device.
  • Lubrication helps reduce friction, preventing heat buildup and prolonging the life of the blade.
  • It allows for smoother and more controlled sharpening motions, resulting in a refined edge.

Testing the sharpness of the blade:

  • After sharpening, it’s crucial to test the blade’s sharpness before use.
  • Perform a simple paper test by gently slicing through a piece of paper.
  • The blade should cut cleanly and effortlessly, as this indicates a properly sharpened broadhead.

Remember, to achieve precision sharpening for your Annihilator Broadhead, maintain consistent pressure, use lubrication, adhere to the correct sharpening angle, and always test the blade’s sharpness before hunting or shooting. With these tips and tricks, you’ll be able to ensure the utmost accuracy and effectiveness with your broadhead.

Common Mistakes To Avoid

Learn how to sharpen your annihilator broadhead effectively by avoiding common mistakes. Follow these 6 guidelines to achieve sharpness and precision without the use of overused phrases or lengthy sentences.


Over-sharpening the blades:

  • Using a grinding wheel with excessive pressure can cause the blades to become fragile and prone to damage.
  • Avoid sharpening the blades too frequently, as it can lead to a reduction in their overall lifespan.
  • Remember, a sharp blade with the correct edge angle is more effective than one that is overly sharp.

Applying excessive pressure during sharpening:

  • Applying too much force while sharpening the broadhead can result in an uneven and imbalanced edge.
  • Use a gentle and controlled motion when sharpening to ensure consistent and optimal blade performance.
  • If you notice any resistance or grinding noise, it’s a sign that you’re applying too much pressure.

Neglecting to clean the broadhead after sharpening:

  • After sharpening, it’s crucial to clean the broadhead to remove any metal shavings, debris, or contaminants.
  • Failure to clean the broadhead can compromise its performance and accuracy.
  • Regularly inspect and clean the broadhead with a soft cloth or brush, ensuring it remains in top condition.

Remember, avoiding these common mistakes will help you maintain the quality and durability of your Annihilator broadhead, ensuring optimal performance when it matters most. Keep these tips in mind when sharpening your broadheads and enjoy a successful hunting experience.

Proper Storage And Maintenance Of Sharpened Annihilator Broadheads

Maintaining and storing sharpened Annihilator Broadheads is essential for their longevity and effectiveness. By following proper storage techniques and regular maintenance, you can ensure that your broadheads stay sharp and ready for your next hunting adventure.


After spending time and effort sharpening your Annihilator Broadheads, it’s crucial to store and maintain them properly to ensure their longevity and optimal performance. Here are some essential tips to protect the sharp edges and maintain the sharpness of your broadheads:

Protecting The Sharp Edges

To prevent accidental injury and maintain the sharpness of your Annihilator Broadheads, consider the following measures:

  • Use blade covers or sheaths: Investing in blade covers or sheaths is an effective way to protect the sharp edges of your broadheads. These protective covers not only safeguard against accidental cuts but also help prevent the blades from dulling or chipping when stored in your hunting backpack or bow case.
  • Avoid stacking broadheads: When storing multiple Annihilator Broadheads, avoid stacking them on top of each other. This can lead to the blades rubbing against one another, causing damage or dulling. Instead, use dividers or separate storage compartments to keep each broadhead individually protected.
  • Store in a secure container: Ensure your Annihilator Broadheads are stored in a secure and designated container. Choose a durable, moisture-resistant box or case to protect them from environmental elements, such as humidity or water exposure. This way, you can maintain their sharpness and effectiveness over time.

Regularly Inspecting And Touching Up The Edge

To keep your Annihilator Broadheads in optimal condition, follow these tips for regular inspection and touch-ups:

  • Inspect before and after each use: Before each hunt, thoroughly inspect your broadheads for any signs of damage, such as bent or nicked blades. After use, clean off any debris, blood, or dirt to prevent corrosion and ensure the edges remain sharp.
  • Touch up the edge: Even with proper storage and care, the sharpness of your Annihilator Broadheads may dull over time. To maintain their cutting ability, periodically touch up the edge with a sharpening stone or honing device. This will help to restore the fine cutting edge and ensure optimal performance in the field.
  • Check alignment and tightness: Along with sharpening, regularly check the alignment of the blades and ensure all screws and connections are tightened securely. Loose or misaligned blades can impact accuracy and effectiveness, so it’s crucial to address any issues promptly.

Remember, proper storage and maintenance of your sharpened Annihilator Broadheads are essential to maximize their lifespan and ensure they perform at their best when you need them most. By protecting the sharp edges and regularly inspecting and touching up the edge, you can be confident in the reliability and cutting power of your broadheads throughout every hunting season.

Final Thoughts On Sharpening Annihilator Broadhead Blades

The process of sharpening Annihilator Broadhead blades can be challenging but rewarding. By following the right techniques and using the proper tools, you can ensure that your broadheads are razor-sharp and ready for a successful hunt. Keep these tips in mind for optimal results.

Importance Of Regular Maintenance And Sharpening

Regular maintenance and sharpening of your Annihilator Broadhead blades is crucial for optimal performance and utmost success during your hunting adventures. Ignoring or neglecting this essential task can have detrimental effects on your accuracy and overall hunting experience. Here are a few reasons why regular maintenance and sharpening should never be overlooked:

  • Enhanced Cutting Efficiency: Maintaining and sharpening your Annihilator Broadhead blades ensures that they retain their sharpness, allowing for effective and efficient cutting upon impact. Dull blades can result in less precise wound channels, potentially leading to missed shots or wounded game.
  • Improved Penetration: Sharp blades have a greater ability to penetrate their target, whether it’s a game animal or a practice target. By keeping your broadhead blades sharpened, you can enhance your chances of achieving deeper and more lethal penetration, increasing your success rate when hunting.
  • Consistent Flight Trajectories: When blades are well-maintained and sharpened, they aid in preserving the optimal weight balance of your broadheads. This, in turn, helps maintain consistent flight trajectories, enabling you to make accurate and precise shots. A consistent flight path is crucial for hitting your target accurately at various distances.
  • Longevity: Investing time in regular maintenance and sharpening of your Annihilator Broadhead blades extends their overall lifespan. By properly caring for your broadheads, you can enjoy their performance and reliability for a more extended period, saving you money on frequent replacements.
  • Confidence in Accuracy: Knowing that your broadheads are well-maintained and sharpened instills confidence in your shooting abilities. When you have confidence in your equipment’s performance, you can focus more on your shot placement and execution, increasing your accuracy and potential hunting success.

Overall Benefits Of Hunting Accuracy And Success

Sharpening your Annihilator Broadhead blades not only ensures their longevity but also provides a range of benefits directly impacting your hunting accuracy and overall success. Let’s explore these benefits:

  • Increased Lethality: Sharp blades deliver swift and lethal hits, resulting in quicker kills and clean harvests. The ability to cleanly harvest game animals is vital from an ethical, humane, and responsible hunting perspective.
  • Enhanced Blood Trails: Well-sharpened Annihilator Broadhead blades create wider and more pronounced blood trails, making tracking wounded game significantly easier. This reduces the chances of losing an animal after the shot, improving your overall hunting success.
  • Better Field Recovery: When you have sharp and well-maintained broadheads, you increase the likelihood of successfully recovering game in the field. The combination of precise shot placement and efficient cutting power leads to better incapacitation and reduces the distance an injured animal can cover before expiring.
  • Reliable Performance: By regularly maintaining and sharpening your blades, you minimize the risk of blade failure or malfunction during crucial moments. Optimal performance from your Annihilator Broadheads directly translates into enhanced reliability and consistent results in the field.
  • Increased Hunting Opportunities: Hunting with sharp broadheads gives you the confidence to engage targets at various ranges and in different hunting scenarios. Whether it’s a long-distance shot or close-quarters encounter, having dependable and sharpened blades broadens your hunting opportunities and increases your chances of success.

Prioritizing the regular maintenance and sharpening of your Annihilator Broadhead blades plays a vital role in ensuring optimal hunting accuracy and success. By maintaining sharpness, you enhance cutting efficiency, improve penetration, maintain consistent flight trajectories, prolong the lifespan of your broadheads, and boost your overall confidence in accuracy.

Additionally, sharpened blades contribute to increased lethality, aid in blood trail visibility, improve field recovery rates, deliver reliable performance, and unlock more hunting opportunities. So remember, to maximize your hunting potential, keep those blades sharp!

Frequently Asked Questions Of How To Sharpen Annihilator Broadhead

Do Annihilator Broadheads Fly Like Field Points?

Yes, Annihilator broadheads fly like field points with accurate tracking and similar flight characteristics.

Do Annihilator Broadheads Work?

Yes, Annihilator broadheads are effective and reliable for hunting and delivering accurate shots.

What Do You Use To Sharpen Broadheads?

To sharpen broadheads, use a broadhead sharpening tool or a sharpening stone.

What Is The Best Stone For Sharpening Broadheads?

The best stone for sharpening broadheads is a fine-grit diamond stone.


Maintaining a sharp Annihilator broadhead is crucial for a successful hunting experience. By following the right techniques, you can ensure that your broadheads retain their sharpness, accuracy, and effectiveness. Regularly inspecting your broadheads for any signs of damage and storing them properly will help prevent premature dulling.

Utilizing the appropriate sharpening tools and techniques, such as sharpening stones or a broadhead sharpener, will enable you to restore the cutting edge to your broadheads. Remember to exercise caution and employ safety measures while sharpening your broadheads. As we’ve discussed throughout this post, a properly sharpened Annihilator broadhead can make all the difference when it comes to achieving quick, clean, and humane kills.

So, take the time to sharpen your broadheads and prepare yourself for a successful hunting season. Happy sharpening and happy hunting!

Leave a Reply

Your email address will not be published. Required fields are marked *